Comparison ledger
Applied Materials 0010-03485 Magnet Assy, MPM Accela, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03485 Magnet AssyApplied Materials | AccelaMPM |
|---|---|---|
| OEM | Applied Materials | MPM |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010-03485 Magnet Assy | MPM Accela |
| Specifications | ||
| Configuration | WP AL 300mm PVD[1] | — |
| OEM | Applied Materials[1] | — |
| Model | 0010-03485[1] | — |
| Description | MAGNET ASSY, WP AL 300MM PVD[2] | — |
| Process | PVD[3] | — |
| Wafer size | 300mm[4] | — |
| Version | Spares[4] | — |
| Part Number | 0010-03485[1] | — |
| Manufacturer | Applied Materials[1] | — |
| Process Type | PVD (Physical Vapor Deposition)[1] | — |
| Application (Material) | Aluminum (AL)[1] | — |
| Wafer Diameter (associated) | 300 mm[1] | — |
| Maximum Board Size (X x Y) | — | 558 mm x 508 mm (22” x 20”)[5] |
| Minimum Board Size (Y x X) | — | 50.8 mm x 50.8 mm (2” x 2”)[5] |
| Maximum Board Weight | — | 7 kg (15 lb)[5] |
| Board Edge Clearance | — | Configurable to 3 mm (0.120”) or 5 mm (0.200”)[5] |
| Transport Speed | — | 8 mm/sec to 1270 mm/sec (0.3”/sec to 50”/sec)[5] |
| Transport Height From Floor | — | 813 mm to 1041 mm (32” to 41”)[5] |
| Transport Track Feed Direction | — | Left-Right, Right-Left, Right-Right, Left-Left[5] |
| Maximum Print Area (X x Y) | — | 558 mm x 508 mm (22” x 20”)[5] |
| Snap-off | — | -0.025 mm to 12.7 mm (-0.001” to 0.500”)[5] |
| Print Speed | — | 6 mm/sec to 305 mm/ sec (0.25”/sec to 12”/sec)[5] |
| Print Force | — | 0.4 kg to 22 kg (0.9 lb to 50 lb)[5] |
| Print Stroke | — | ±280 mm (±11”) from center[5] |
| Stencil Frame Size | — | 737 mm x 737 mm (29” x 29”) adjustable to 584mm x 584 mm, (23” x 23”) for tubular frames[5] |
| Vision Field-of-View (FOV) | — | 10.6 mm x 8.0 mm (0.417” x 0.315”)[5] |
| Total System Alignment | — | ±12.5 microns Accuracy and Repeatability (±0.0005”) at 6 sigma, Cpk of greater than or equal to 2.0[5] |
| Wet Print Deposit | — | ±25 microns Accuracy and Repeatability (±0.001”) at 6 sigma, Cpk of greater than or equal to 2.0[5] |
| Cycle Time | — | Less than 5.5 sec[5] |
| Power Requirements | — | 200 to 240 V AC (±10%) single phase @ 50/60Hz, 15A[6] |
| Machine Weight | — | 2205 kg (4850 lb)[5] |
| Width | — | 1357 mm (53.4")[6] |
| Depth | — | 2169 mm (85.4")[6] |
| Height (excluding light tower) | — | 1950 mm (76.7")[6] |