Comparison ledger
Applied Materials 0020 54137 Part, ASM Siplace SX, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0020 54137 PartApplied Materials | Siplace SXASM |
|---|---|---|
| OEM | Applied Materials | ASM |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0020 54137 Part | ASM Siplace |
| Cited variants | — | |
| Specifications | ||
| Configuration | Conn Ector Copper Threaded W / Solder Ptg[2] | Feeders not included[3] |
| Pressure | — | 5-10 bar[4] |
| Full Load Current | — | 15/Ph A[3] |
| Type | — | Pick-and-place machine[4] |
| Make | — | ASM[4] |
| Model | — | Siplace SX[4] |
| Power | — | 50/60 Hz[4] |
| Supply voltage | — | 120/208 V[4] |
| PnP head part number | — | CP20[4] |
| Software | — | STATION version 713.1[4] |
| Vision software | — | Vision @127.0.0.1 572.5.0[4] |
| Operation hours | — | 92353[4] |
| Component count | — | 40373702[4] |
| Camera | — | Camera for CP head (type 34 & 41)[3] |
| Head type | — | CP20A[4] |
| Changeover table | — | 1[3] |
| Feeder carts | — | 2 feeder carts / 60 slots ea[4] |
| Nozzle changer | — | 8 noz changer with nozzles (4 front / 4 rear)[3] |
| Vintage | — | 2012[4] |
| Placement speed SX1 | — | 43,250 cph[5] |
| Placement speed SX2 | — | 86,500 cph[5] |
| Placement accuracy | — | +/- 25µ @ 3σ[5] |
| PCB dimensions, single-track conveyor | — | up to 450 mm x 560 mm[5] |
| PCB dimensions, dual-track conveyor | — | up to 450 mm x 265 mm[5] |
| Long board option | — | up to 1525 mm x 560 mm[5] |
| Feeder capacity | — | up to 120 x 8 mm feeder[5] |
| Machine dimensions | — | 1,5 m × 2,475 m × 1,45 m (L x W x H)[5] |
| M2M communication interfaces | — | IPC-HERMES-9852, WORKS Operations Information Broker, IPC-CFX[5] |
| Category | — | Assembly / SMT[4] |
| Optics | — | Camera for CP head (type 34 & 41)[4] |
| Placement heads | — | CP20, CPP, TWIN or TH head options[4] |
| Change over table | — | 1[4] |
| Dual head & conveyor | — | present[4] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →