Comparison ledger
Canon FPA 3030 i 5+ Fine Pattern, Nikon 1505 G 6 E, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1505 G 6 ENikon | |
|---|---|---|
| OEM | Canon | Nikon |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | 1988– |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Canon FPA | Nikon 1505 |
| Specifications | ||
| Configuration | 350 nm[1] | 5" reticle[3] |
| Make | Canon[1] | Nikon[3] |
| Model | FPA 3030 i 5+[1] | 1505 G 6 E[3] |
| Type | Stepper[2] | — |
| Technology | i-line (365nm)[2] | — |
| Wafer Size | 200mm; 150mm[2] | 4 inch[3] |
| Resolution | ≤0.35μm[2] | 650 nm[4] |
| Numerical Aperture (NA) | 0.45 ~ 0.63[2] | — |
| Reticle Size | 6in. (0.25in. thick); optional 5in.[2] | — |
| Reduction Ratio | 5:1[2] | — |
| Field Size | 22mm x 22mm[2] | — |
| Overlay Accuracy | ≤40nm (|m|+3 )[2] | — |
| Throughput | ≥104wph (200mm); ≥120wph (150mm)[2] | — |
| Numerical Aperture | — | 0.54[4] |
| Reduction | — | 5x[4] |
| Exposure Field | — | 15 x 15 mm[4] |
| Alignment Accuracy | — | 130 nm[4] |
| Light Source | — | g-line[5] |
| Introduction Year | — | 1988[4] |
| NA (Numerical Aperture) | — | 0.54[4] |
| Category | — | Stepper[3] |
| Wafer Sizes | — | 4 inch[3] |
| Exposure type | — | g-line[4] |
| NA | — | 0.54[4] |
| Exposure field | — | 9.3 x 18.8 mm[4] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →