Comparison ledger
KLA 1007, Teradyne TS 121 ICT, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1007KLA | TS 121 ICTTeradyne |
|---|---|---|
| OEM | KLA | Teradyne |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | KLA 1007 | Teradyne TS 121 ICT |
| Specifications | ||
| Manufacturer | KLA[1] | Teradyne[3] |
| Model | 1007[1] | TS 121 ICT[3] |
| Description | Wafer Prober[1] | — |
| Wafer size | 150 mm[1] | — |
| Convertible to 8 inch wafer size | Yes[1] | — |
| Vintage | 01.06.1995[1] | — |
| Make | KLA[2] | — |
| Equipment type | Prober[2] | In-circuit tester[4] |
| Configuration | — | Windows XP[3] |
| Current S/W Version | — | Teradyne Navigate 6.4.0.0.28[3] |
| Pinboard Type | — | Ultra 121[3] |
| Pinboard Capacity | — | 30 (currently GDMS has 16 boards)[3] |
| Max Real Nails | — | 3840 (currently GDMS has 2080 nails)[3] |
| Mux Ratio | — | 1:1[3] |
| DC voltage source | — | ±18V[3] |
| DC current source | — | ±500mA[3] |
| DC voltmeter | — | 0 to ±200V[3] |
| DC ammeter | — | 0 to ±160mA[3] |
| Resistance Range | — | 0.1 to 30MΩ[3] |
| Operating system | — | Windows XP[3] |
| Software | — | Teradyne Navigate 6.4.0.0.28[3] |
| Pinboard capacity | — | 30[3] |
| Max real nails | — | 3840[3] |
| Fixed power supply | — | +5V, 6A[3] |
| Variable power supply | — | +20V, 8A (2)[3] |
| Automatic vacuum control | — | For clamshell fixtures[3] |
| Capacitive range | — | 1pF to 10,000F[3] |
| Inductive range | — | 10H to 1000H[3] |
| Programmable frequency range | — | 15Hz to 100kHz[3] |
| Programmable AC level | — | 0 to 7Vrms[3] |
| Programmable DC offset | — | Present[3] |
| Programmable drive levels | — | 26 levels, +5.5V to -2.5V[3] |
| Programmable sense thresholds | — | 26 thresholds, +5.5V to -2.5V[3] |
| Calibration | — | Traceable calibration daughterboard[3] |
| 26 Programmable Drive Levels, Range | — | +5.5V to –2.5V[3] |
| 26 Programmable Sense Thresholds, Range | — | +5.5V to –2.5V[3] |
| Category | — | Test & Probe[4] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →