Comparison ledger
Applied Materials 0010-03485 Magnet Assy, SCREEN SCV660MD, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03485 Magnet AssyApplied Materials | SCV660MDSCREEN |
|---|---|---|
| OEM | Applied Materials | SCREEN |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010-03485 Magnet Assy | SCREEN SCV660MD |
| Specifications | ||
| Configuration | WP AL 300mm PVD[1] | — |
| OEM | Applied Materials[1] | — |
| Model | 0010-03485[1] | — |
| Description | MAGNET ASSY, WP AL 300MM PVD[2] | — |
| Process | PVD[3] | — |
| Wafer size | 300mm[4] | — |
| Version | Spares[4] | — |
| Part Number | 0010-03485[1] | — |
| Manufacturer | Applied Materials[1] | — |
| Process Type | PVD (Physical Vapor Deposition)[1] | — |
| Application (Material) | Aluminum (AL)[1] | — |
| Wafer Diameter (associated) | 300 mm[1] | — |
| Product type | — | Equipment screen[5] |
| Model listing | — | SCV660MD[5] |
| Material | — | Extruded aluminum[5] |
| Fabrication | — | Mechanically fastened[5] |
| Finish | — | Finished-after-assemble[5] |
| Type | — | vertical blade louver[6] |
| Model designation | — | SCV660MD[6] |
| Construction material | — | extruded aluminum components[6] |
| Aluminum alloy | — | 6063-T5[6] |
| Louver depth | — | 6 in. (152.4 mm)[6] |
| Blades | — | vertical, V-type with center hook[6] |
| Blade spacing | — | 0.75 in. on center[6] |
| Frame thickness | — | 0.095 in. (2.41 mm)[6] |
| Blade thickness | — | 0.063 in. (1.60 mm)[6] |
| Visible mullions | — | yes[6] |
| Free area | — | 7.29 sq. ft. (0.68 m²)[6] |
| Percent free area | — | 45.6%[7] |
| Beginning point of water penetration | — | above 1,250 fpm (6.35 m/s) free area velocity[6] |
| Minimum air volume flow rate at beginning point of water penetration | — | 9,112 cfm (4.30 m³/s)[6] |
| Maximum static pressure at beginning point of water penetration | — | 0.18 in. H2O (0.4 kPa)[6] |
| Max intake volume | — | 9,100 cfm (4.295 m³/s)[7] |
| Intake pressure drop at 6,000 CFM | — | 0.107 in. wg (0.027 kPa)[7] |
| Maximum wind load | — | +/- 150 PSF (7.2 kPa)[7] |
| Minimum rough opening size | — | 12 in. W x 12 in. H (305 mm W x 305 mm H)[7] |
| Maximum rough opening size | — | Unlimited W x 120.5 in. H (unlimited W x 3061 mm H)[7] |
| Maximum rough opening single section sizes | — | 48.5 in. W x 120.5 in. H; 60.5 in. W x 96.5 in. H; 96.5 in. W x 60.5 in. H[7] |
| AMCA certification | — | licensed to bear the AMCA Seal[7] |
| AMCA listing | — | approved to bear the AMCA Listing Label[7] |
| Florida Product Approval No. | — | FL16746[7] |
| Miami-Dade NOA No. | — | 22-0707.09, EXP. 10/4/2027[7] |
| Test standards | — | AMCA Standard 500-L, AMCA 540, AMCA 550, TAS 201, TAS 202, TAS 203[7] |