Comparison ledger
Branson 101-149-053 Gold Booster, Kulicke & Soffa IConn MEM Plus, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | IConn MEM PlusKulicke & Soffa |
|---|---|---|
| OEM | Branson | Kulicke & Soffa |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | Kulicke & Soffa IConn MEM Plus |
| Specifications | ||
| Configuration | 1:1.5[1] | — |
| Manufacturer | Branson[2] | — |
| Model | 101-149-053[2] | — |
| Type | Gold Booster[2] | — |
| Operating frequency | 20 kHz[3] | — |
| Gain | 1:1.5[2] | — |
| Mounting thread | 1/2-20[3] | — |
| Length | 5.4 in[3] | — |
| Gain ratio | 1:1.5[2] | — |
| Ultra Fine Pitch | — | 35 μm[4] |
| Gold wire diameter | — | 0.6 mil to 2.0 mil[4] |
| Silver alloy wire diameter | — | 0.6 mil to 2.0 mil[4] |
| Bonding Area (X) | — | 56 mm[4] |
| Bonding Area (Y) | — | 80 mm[4] |
| Total Bond Placement Accuracy | — | 2.0 μm @ 3 sigma[4] |
| Maximum Wire Length (1.0 mil wire) | — | 7.6 mm[4] |
| Maximum Wire Length (0.6 mil wire) | — | 3.0 mm[4] |
| Minimum Loop Height (0.6 mil wire) | — | 40 μm[4] |
| Input Voltage | — | 200-240 VAC, single phase, 50/60 Hz[4] |
| Power Consumption (nominal) | — | 1.5 KVA[4] |
| Power Consumption (max) | — | 2.6 KVA[4] |
| Footprint | — | 889 mm x 1009 mm (35" x 39.7")[4] |
| Weight (machine only) | — | 620 kg (1367 lbs)[4] |
| Minimum Air Pressure | — | 3.52 kg/sq cm (50 psi)[4] |
| Nominal Air Consumption | — | 185 liters/min @ 4.6 kg/sq cm (6.5 CFM @ 65 psi)[4] |
| Cover Gas Consumption (nominal) | — | 0.9 liters/min[4] |
| Setup Time (same leadframe type) | — | < 4 min[4] |
| Setup Time (different leadframe type) | — | < 8 min[4] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →