Agilent
Cary 50 Scan Spectrophotometer
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Agilent Cary 50 Scan Spectrophotometer is a UV-Vis spectrophotometer. The Agilent Cary 50 Scan Spectrophotometer is a single-beam instrument. The Agilent Cary 50 Scan Spectrophotometer has a maximum scan speed of 24,000 nm per minute.[1][2]
How it works
The Cary 50 draws operating power from the host computer and interfaces through a PC internal slot and power connector.[3]
Where it fits in the process flow
The Cary 50 is intended for indoor laboratory use and is designed to operate with a computer, monitor, and printer as part of the system.[3]
What do the numbers mean?
Power & electrical3
Optics & imaging7
Control & software1
Dimensions & facilities3
Configuration & options7
- Scan speeds up to 24000nm per min.[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What types of samples can be measured with this class of instrument?General reference — not yet source-verified
Machines of this class are generally used for liquid samples in cuvettes, as well as for solid materials that are transparent or have suitable reflective surfaces. Measurements are most straightforward when the beam passes through the sample, so solid samples are typically prepared as flat plates, films, or paired windows.
What are the usual outputs of a scanning spectrophotometer?General reference — not yet source-verified
The primary output is a spectrum of absorbance or transmittance versus wavelength. From that spectrum, the user can identify absorption peaks, calculate concentration using a calibration curve, or compare the optical response of a sample to an established specification.
What routine checks are required to keep measurements reliable?General reference — not yet source-verified
Routine practice includes performing a baseline or blank measurement, periodically validating the wavelength and photometric accuracy with reference standards, and keeping the optical surfaces, sample holders, and cuvettes clean. The light source is a consumable item that may require replacement as it ages.
Can this type of instrument be used for thin-film metrology?General reference — not yet source-verified
Inspection applications often include thin films, but the measurement is indirect. The instrument measures the combined optical response of the film and its substrate; users extract film properties by comparing the measured spectrum to an optical model or by using the interference pattern. Results are therefore model-dependent and best suited for films with predictable optical constants.
Not publicly documented
The following facts about the Cary 50 Scan Spectrophotometer are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Cary 50 Scan Spectrophotometer are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Cary 50 Scan Spectrophotometer are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Cary 50 Scan Spectrophotometer are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Cary 50 Scan Spectrophotometer are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Cary 50 Scan Spectrophotometer is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]labwrench.com — labwrench.comlabwrench.com
- [3]photos.labwrench.com — photos.labwrench.comphotos.labwrench.com
Last updated Oct 5, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
