CyberOptics
LSM 300
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The CyberOptics LSM 300 is an off-line solder paste inspection system. The CyberOptics LSM 300 uses a non-contact laser-based measurement approach. The CyberOptics LSM 300 provides automatic height measurements and dimensional x-/y-measurements.[1]
Produced
1991–1997
Optics
CyberOptics[2]
What it is
How it works
The LSM 300 uses non-contact laser-based inspection. The LSM 300 performs automatic height measurements and also provides dimensional x- and y-measurements, area data, and volume data for pad forms.[1]
The LSM 300 uses adjustable magnification and variable measurement range for solder paste inspection tasks. The LSM 300 is intended to improve repeatability by reducing inconsistency from manual measurement.[1]
Where it fits in the process flow
The LSM 300 fits into the printed circuit board assembly process after solder paste printing and before subsequent assembly steps. The LSM 300 is used to inspect wet solder paste immediately after printing.[1]
The LSM 300 can also be used to measure stencil apertures and to examine solder joints after reflow. The LSM 300 supports process monitoring and documentation in solder paste inspection workflows.[1]
Applications
The LSM 300 is used for solder paste height and width measurement. The LSM 300 is used for dimensional inspection of pad forms in SMT-related applications.[1]
The LSM 300 is used for off-line solder paste inspection on printed circuit boards. The LSM 300 is used for analysis and documentation tasks associated with solder paste inspection.[1]
What do the numbers mean?
Optics & imaging2
Dimensions & facilities2
Configuration & options4
Vintage & configurations
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What does the LSM 300 inspect?
The LSM 300 inspects solder paste on printed circuit boards.[1]
What measurements does the LSM 300 provide?
The LSM 300 provides height measurements, dimensional x- and y-measurements, area data, and volume data.[1]
What inspection methods does the LSM 300 use?
The LSM 300 uses a single laser stripe and triangulation technology.[1]
Where is the LSM 300 used in the solder paste flow?
The LSM 300 is used to inspect wet solder paste immediately after printing.[1]
Not publicly documented
The following facts about the LSM 300 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented variants, configuration options, or revision breakpoints of the LSM 300 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the LSM 300 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the LSM 300 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the LSM 300 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the LSM 300 are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]lvtechnologies.com — lvtechnologies.comlvtechnologies.com
- [2]Equipment inventory listing
- [3]LSM 300 — CyberOptics | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [4]ASC CyberOptics LSM 300 - D.K.R — dkr.co.ildkr.co.il
Last updated Sep 30, 2026.
Compare with similar tools
View all →The KLA .204 PSL Wafer is an 8-inch NIST-traceable reference wafer compatible with Surfscan 6xy0 and Sp1 particle counters.
KLA .496 PSL Wafer is an 8-inch NIST traceable wafer stated to be capable on Surfscan 6xy0 and SP1.
The KLA .498 PSL Wafer is a NIST traceable reference wafer.
