Juki
JX-100 LED
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
Juki announced the JX-100 LED on April 19, 2010, and it became available from April 1, 2010.[2]
The machine can process boards with a minimum size of 50 mm × 50 mm and a maximum size of 800 mm × 360 mm.[2]
The JX-100 LED places components from 0603 mm (0201 inch) up to 33.5 mm square.[2]
Placement accuracy is ±0.05 mm at ±3 sigma.[2]
The JX-100 LED accepts up to 30 feeders in the front bank and up to 60 with an optional rear bank.[2]
How it works
The JX-100 LED uses a laser centering system (LNC60) to align components during placement.[2]
The machine incorporates a dedicated LED component recognition algorithm that improves the detection of LED parts.[2]
An automatic remaining-component management function prevents the placement of LEDs with mismatched illumination intensity.[2]
Boards can be transported in either pass-through or U-turn mode, allowing flexible machine layout.[2]
During placement a laser sensor monitors component pick status, helping to avoid defects such as dropped components, returned components without placement, and tombstoning.[2]
The main frame is a single-unit casting for vibration damping and durability.[2]
Where it fits in the process flow
The machine's nozzles, tape feeders, and production data are compatible with upper-end Juki models, which aids production changeovers and investment efficiency.[2]
Applications
The JX-100 LED is designed for placing LEDs used in backlight units of notebook PCs, large LCD televisions, LED fluorescent lamps, vehicle lighting, and indoor/outdoor lighting apparatus.[2]
What do the numbers mean?
Optics & imaging1
Performance1
Dimensions & facilities1
- Component height
- 12.0 mm (becomes 9.0 mm when board’s X-directional length exceeds 630 mm)[2]
Configuration & options8
- Board size range
- Min 50 mm × 50 mm to Max 800 mm × 360 mm (when sent through twice; when sent through once, maximum length is 410 mm × 360 mm)[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the JX-100 LED are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the JX-100 LED are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the JX-100 LED are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the JX-100 LED are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the JX-100 LED are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the JX-100 LED is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]dealer listingwotol.com
- [2]juki.co.jp — juki.co.jpjuki.co.jp
Last updated Sep 24, 2026.
Compare with similar tools
View all →The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
