Laurell
EDC-650-8B
The Laurell EDC-650-8B is an EDC System spin coater. The Laurell EDC-650-8B is in the 650 Series. The Laurell EDC-650-8B has a maximum substrate size of 200mm (7" x 7") and a maximum RPM of 12,000 rpm.[1]
What it is
The Laurell EDC-650-8B is a spin coater in the EDC System 650 Series.[1]
How it works
General reference — not yet source-verifiedA spin coater applies a liquid film to a flat substrate and uses rapid rotation to spread the liquid into a thin, uniform layer.
A spin coater is used with a substrate held on a rotating stage, and the deposited material is distributed by centrifugal force while excess liquid is removed from the surface.
Where it fits in the process flow
General reference — not yet source-verifiedA spin coater is a front-end wet-process tool used before later lithography and pattern-transfer steps.
A spin coater commonly sits in a resist-coating sequence before soft bake and exposure.
Applications
General reference — not yet source-verifiedA spin coater is used for photoresist and other thin-film coating processes on semiconductor and related substrates.
A spin coater is also used for laboratory and pilot-line coating of functional liquids that must form a controlled thin layer.
What do the numbers mean?
Wafer handling1
Configuration & options5
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the EDC-650-8B are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the EDC-650-8B are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the EDC-650-8B are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the EDC-650-8B are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the EDC-650-8B are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the EDC-650-8B is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]laurell.com — laurell.comlaurell.com
Last updated Oct 7, 2026.
Compare with similar tools
View all →The Laurell EDC-650-8 B is an EDC System 650-series spin coater with a maximum substrate size of ø 200mm (7" × 7") and a maximum speed of 12000 rpm.
Laurell EDC-HL-8 B is an EDC System 650-series spin coater with a maximum substrate size of 200mm (7" x 7").
The Laurell H6-8 B is a spin coater in the 650-series with a maximum substrate size of 200mm (7" x 7"), a maximum speed of 12000 rpm, and tabletop, in-deck, or on-deck mounting options.
The Laurell WS-650-8 B is a 650-series spin coater with a maximum substrate size of 200mm (7" x 7") and a maximum speed of 12000 rpm.
