Neslab

HX 150 Chiller

Lab & Support Equipment Neslab HX 150 family

Research Quality: 40% complete

The Neslab HX 150 Chiller is a Cool Flow Refrigerated Recirculator. The Neslab HX 150 Chiller uses a TU-1 pump and requires 208V, 14 Amps, single phase power.^[1]^[2]

HX 150 Chiller — Inventory photo — Fig. 01HX 150 ChillerInventory photo^[1]

Power

208V - 14 Amps - Single phase 3 wire^[1]

Vacuum

Pump type TU-1^[1]

What it is

The Neslab HX 150 Chiller is a refrigerated recirculator.^[1]^[2]

What do the numbers mean?

Power & electrical5

Voltage: 208V - 14 Amps - Single phase 3 wire^[1]
Voltage: 208V, 14 Amps, Single phase^[2]
Voltage: 208V^[1]
Current: 14 Amps^[1]
Phase: Single phase^[1]

Vacuum & pumping2

Pump type TU-1^[1]
Pump type: TU-1^[1]

Configuration & options10

Cool Flow Refrigerated Recirculator^[1]; Set up for R-22^[1]; Tested in working condition^[1]; Set up fpr R427A^[2]
Make: Neslab^[3]
Model: HX 150^[3]
Type: Cool Flow Refrigerated Recirculator^[1]
Refrigerant: R-22 (some units), R427A (other units)^[1]
Refrigerant configuration: Set up for R-22 or R427A^[2]
Condition (example units): Tested in working condition^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

ConfigurationPump type TU-1^[1]
Voltage208V - 14 Amps - Single phase 3 wire^[1]
Voltage208V, 14 Amps, Single phase^[2]
Pump typeTU-1^[1]
Voltage208V^[1]
Current14 Amps^[1]
PhaseSingle phase^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the electrical supply requirement for the Neslab HX 150?

The HX 150 requires 208 volts, 14 amps, single phase (3 wire).^[1]^[2]

What type of pump does the HX 150 use?

The HX 150 uses a TU-1 pump type.^[1]^[2]

Not publicly documented

The following facts about the HX 150 Chiller are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the HX 150 Chiller are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the HX 150 Chiller are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the HX 150 Chiller are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the HX 150 Chiller are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the HX 150 Chiller is not on record.
Answerable by: an OEM datasheet or a fab qualification report