Speedline

Momentum Elite

Assembly / SMT Speedline Momentum family

Research Quality: 50% complete

The Speedline MPM Momentum Elite is a screen printer for SMT assembly. The MPM Momentum Elite is the top performer of the Momentum series, offering the highest throughput and shortest cycle times. The MPM Momentum Elite is configured with a triple track rail system featuring an input buffer, a central processing section, and an output buffer.^[1]^[2]

Momentum Elite — Inventory photo — Fig. 01Momentum EliteInventory photo^[3]

Power

50/60 Hz^[3]

Vacuum

100 PSI at 4 CFM^[1]

Performance

12.5 microns^[1]

What it is

General reference — not yet source-verified

The Speedline Momentum Elite is a screen printer used in surface-mount technology assembly for depositing solder paste onto printed circuit boards.

How it works

General reference — not yet source-verified

In a screen printer, solder paste is forced through a stencil onto the board pads using a squeegee. The board is held in place and the stencil is aligned to the board using vision. After printing, the stencil is separated from the board, and the paste remains on the pads.

Applications

General reference — not yet source-verified

Screen printers of this class are used for assembling printed circuit boards in industries such as consumer electronics, automotive, telecommunications, and medical devices.

Why won't it start?

Documented failure modes, common issues, and field considerations.

One source states the machine was complete and working but could not be fully tested due to lack of power supply.

What do the numbers mean?

Power & electrical5

50/60 Hz^[3]; 200-240 V^[3]
Largest Single Load: 6 Amps^[3]
Full Load Current: 10 Amps^[3]
Power Requirements: 200 to 240 VAC Single Phase 50/60Hz^[1]

Vacuum & pumping1

Air Supply: 100 PSI at 4 CFM^[1]

Performance4

Total System Alignment: 12.5 microns^[1]
Alignment Repeatability: ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0^[1]
Alignment Repeatability: +/-12.5 microns @ 6 sigma, Cpk > 2^[2]
Wet Print Accuracy: 20 microns @ 6 sigma, Cpk > 2^[2]

Dimensions & facilities5

Dimensions (W x D x H): 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")^[1]
Machine Weight: 899 kg (1982 lbs)^[1]
Maximum Board Weight: 4.5 kg (9.92 lbs)^[2]
Board Edge Clearance: 3.0 mm (0.118")^[2]
Underside Clearance: 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")^[2]

Configuration & options8

Maximum Board Size (X x Y): 609.6 mm x 508 mm (24" x 20")^[1]
Maximum Board Size (X x Y) in Staging Mode (Momentum Elite): 457 mm x 508 mm (18" x 20")^[1]
Minimum Board Size (X x Y): 50.8 mm x 50.8 mm (2" x 2")^[1]
Board Thickness: 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils^[1]
Maximum Print Area (X x Y): 609.6 mm x 508 mm (24" x 20")^[1]
Print Gap (Snap-off): 0 mm to 6.35 mm (0" to 0.25")^[1]
Stencil Frame Size: 737 mm x 737 mm (29" x 29")^[1]
Vision Field-of-View (FOV): 106 mm x 8 mm^[1]

Vintage & configurations

Documented models & variants

Designation	Generation	Vintage	Changes	Source
Momentum Elite DL	—	—	—	youtube.com^[5]

Interested in this tool?

Need help with this tool?Embed spec card

What replaced it?

Alternatives

Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.

DEK 288— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
DEK 248— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
Dek Horizon 03 i— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
Dek NeoHorizon 03 ix— Same function class: Assembly / SMT, nullCompare in depthsource^[1]

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Configuration50/60 Hz^[3]
Configuration200-240 V^[3]
Largest Single Load6 Amps^[3]
Full Load Current10 Amps^[3]
Power Requirements200 to 240 VAC Single Phase 50/60Hz^[1]
Air Supply100 PSI at 4 CFM^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the alignment accuracy?

12.5 microns at 6 sigma, Cpk greater than or equal to 2.0^[1]

What are the power requirements?

200 to 240 VAC single phase, 50/60 Hz, 15 A^[1]

What is the board thickness range?

0.2 mm to 5.0 mm, up to 6.0 mm without top clamp foils^[1]

What type of vision system does it use?

Single digital camera with look-up/down vision, field-of-view 106 mm x 8 mm^[1]

What is the machine weight?

899 kg (1982 lbs)^[1]

Not publicly documented

The following facts about the Momentum Elite are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Momentum Elite are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Momentum Elite are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the Momentum Elite is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Momentum Elite are on record.
Answerable by: an OEM parts catalog or a service engineer
No publicly hosted manuals, SOPs, or datasheets for the Momentum Elite are on record.
Answerable by: university cleanroom staff or an OEM application specialist