Semics

Opus 3

Research Quality: 50% complete

The Semics Opus 3 is a prober for semiconductor wafer testing. The Semics Opus 3 supports 8 inch and 12 inch wafers. The Semics Opus 3 operates on 200-240 V AC at 50/60 Hz.^[1]^[2]^[3]

Opus 3 — Inventory photo — Fig. 01Opus 3Inventory photo^[2]

Plate 01SEMICS OPUS3 INITIALIZING (S/N S12B3E12 20220128)
Kwon JinnWatch on YouTube
Plate 02Opus3 8inch demo ★1
팅커보이Watch on YouTube
Plate 03SEMICS OPUS3 Prober 프로브스테이션
링크머신 제조업 중고기계거래 플랫폼Watch on YouTube
Plate 04OPUS3 INITIAL, Load&Unload wafer
James KimWatch on YouTube

Power

200-240 V^[2]

Control era

MS Windows XP Professional

What it is

General reference — not yet source-verified

The Semics Opus 3 is a semiconductor prober used for test and probe operations.

How it works

General reference — not yet source-verified

A prober brings a wafer or die into precise contact with test probes so electrical measurements can be taken before later assembly steps.

Where it fits in the process flow

General reference — not yet source-verified

A prober sits in the wafer test flow before final packaging and can be used to screen devices while they are still on the wafer.

Applications

General reference — not yet source-verified

The Semics Opus 3 is used for wafer probing and electrical test of semiconductor devices.

What do the numbers mean?

Power & electrical9

Power Supply: 200-240 V^[2]; 50/60 Hz^[2]; 200-240 V^[4]; 200-240V^[1]
Power Supply: 200-240 V, 15A, 50/60 Hz^[3]
Power Supply: 200-240 V, 15 A, 50/60 Hz^[9]
Power Supply Voltage: 200-240 V^[2]
Power Supply Current: 15 A^[2]
Power Supply Frequency: 50/60 Hz^[2]

Wafer handling5

Hot chuck^[1]
Wafer Sizes: 8 inch, 12 inch^[1]
Hot Chuck: Included^[1]
Wafer Sizes: 8, 12 inch^[1]
Hot Chuck: Yes^[1]

Control & software2

Communication Interface: GPIB^[1]
Operating System: MS Windows XP Professional^[1]

Configuration & options10

15 A^[2]
Full Load Current: 11 A^[2]; Communication GBIP^[1]; MS Windows XP Professional^[1]; Does not include cables, docking and peripherals shown^[1]
Max Ampere Rating: 25 A^[3]
Interruption Capacity: 10 kA^[3]
Type: Prober^[2]
Communication: GBIP^[1]
Vintage: 2014, 2015, 2016, 2017 (observed units)^[2]

Vintage & configurations

Control-system eraMS Windows XP Professional^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What replaced it?

Alternatives

Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.

Accretech UF 3000 Automatic Wafer— Same function class: Test & Probe, UnknownCompare in depthsource^[2]
Accretech UF 300 A Automatic Wafer— Same function class: Test & Probe, UnknownCompare in depthsource^[2]
Accretech UF 3000 EX— Same function class: Test & Probe, nullCompare in depthsource^[10]
Accretech 3000 EX— Same function class: Test & Probe, nullCompare in depthsource^[11]

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Power Supply200-240 V^[2]
Configuration50/60 Hz^[2]
Configuration200-240 V^[4]
Configuration200-240V^[1]
Power Supply200-240 V, 15A, 50/60 Hz^[3]
Power Supply200-240 V, 15 A, 50/60 Hz^[9]
Power Supply Voltage200-240 V^[2]
Power Supply Current15 A^[2]
Power Supply Frequency50/60 Hz^[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What model designation is given for the equipment?

The model designation is Opus 3.^[2]^[4]^[1]^[3]^[12]

Not publicly documented

The following facts about the Opus 3 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Opus 3 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Opus 3 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
No publicly documented failure modes or field errata for the Opus 3 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Opus 3 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Opus 3 are on record.
Answerable by: an OEM parts catalog or a service engineer