Tokyo Electron

A prober is a piece of semiconductor test equipment that positions a wafer on a chuck and brings a probe card into contact with the die's pads to enable electrical testing. The P 12 XLn+ prober supports wafer sizes of eight and twelve inches.[7]
The P 12 XLn and P 12 XLn+ are configured for memory and logic test applications. The P 12 XLn+ may be used for memory testing.[2]
The P 12 XLn+ prober may be used for logic testing.[5]
The P 12 XLn models accept a rated power input of 208 V, 50/60 Hz, with a rated breaker input of 30 A and an ampere interrupt capacity of 35 kA.[1][2][5]
The P 12 XLn+ prober can include a nickel chuck top, a hot temperature controller, a GPIB interface, a WAPP option, a Combo350 interface, and a standard foul loader with standard upper and lower pincettes.[6]
The P 12 XLn+ prober is applied in testing logic devices.[5]
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| P 12 XLn+ | — | 2006–2007 | Sources state different configurations, including wafer sizes 8 and 12 inch, GPIB interface, temperature range -40 ~ 150 C, and options such as Hot Temp Controller, WAPP Option, Combo350 Interface, Standard Foub Loader, Standard Upper / Low Pincette, and No SACC. | Equipment inventory listing[7] |
| P 12 XLn+ Prober | — | 2006–2007 | Sources distinguish 2006 and 2007 vintage entries; one entry says it may be used for logic, another says it may be used for memory, and one lists options including nickel chuck top, hot temp controller, GPIB interface, WAPP option, Combo350 interface, standard foub loader, standard upper / low pincette, and no SACC. | Equipment inventory listing[6] |
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
No research found yet — worked with this tool? Share what you know.
8-inch and 12-inch.[7]
The P 12 XLn operates at 50/60 Hz with a rated breaker input of 30 A and an ampere interrupt capacity of 35 kA.[1]
The P 12 XLn+ has a rated power input of 208 V, 50/60 Hz, and a rated breaker input of 30 A.[2][5][6]
Nickel chuck top, hot temperature controller, GPIB interface, WAPP option, Combo350 interface, standard foul loader, and standard upper and lower pincette.[6]
The following facts about the P 12 XLn are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the P 12 XLn are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the P 12 XLn are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the P 12 XLn are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the P 12 XLn is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the P 12 XLn are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Last updated Oct 7, 2026.